Send Your Offer To Over 1000 People Per Day - FREE FULL E-Mail Harvester + Blaster

[caesar]

Hi there folks, I have been messing around with E-Mail the last few Days, I wanted to find ways to get my Offers in front of a lot of People at once, you have probably heared that E-Mail marketing is an effective way of getting the Message across and helps you get more Buyers and Subscribers or whatever it is you need, well I thought I would put it to the test and it turns out that I found some great things that really do work well and I wanted to give you some FREE Software too.

The first thing you will need is E-Mail Addresses, but where and how to get them?

You can buy them from People or you can Harvest them yourself pretty easily by simply using some easy little search Codes in Google!

There are lots of combinations of Google Search Codes but I just use a few here...

1. Let's say you want to find E-Mail Addresses that are random (that is not really related to any Niche) that have a certain extention like gmail for example, you would type into the Google Search Box...

Code:

"@gmail.com"

It is important to include the Quotation marks as Google will use EXACT Search for that E-Mail extention.

2. Now what if we wanted to find other E-Mail Extensions? You simply use the OR command in between...

Code:

"@gmail.com" OR "@ymail.com" OR "@hotmail.com"

Then Google will Search for any E-Mails with those Extentions.

3. How about finding those E-Mail Addresses but in a certain Niche? You just us the INURL: command at the end...

Code:

"@gmail.com" OR "@ymail.com" OR "@hotmail.com" INURL:Internet Marketing

You can use ANY keywords for a Niche, alsong as you have the INURL: command before them.

4. So if you wanted to search a certain Website for those E-Mails, you would use the SITE: command, this might not work with the INURL: command though, so we will not use that for this example (you can experiment though and see what results you get)...

Code:

"@gmail.com" OR "@ymail.com" OR "@hotmail.com" SITE:twitter.com

It doesn't need the www. part for most Websites either, and also don't rely on Harvesting Twitter E-Mails, they have a very strong Anti-Spam policy and could wipe the floor with you, I just used it as an example Website, it's probably best to search for Forums that are in the Niche you are looking to use and use their Website Address in your Search!

It is a good idea to Log-In to Google (if you have an Account) and set your Results to 100 per Page, you will only get a Maximum of 10 Pages that way, but that's a potential 1000 E-Mail Addresses for you to use for each of your Searches!

Now you will want to Harvest the E-Mail Addresses, well it just so happens that there is a FREE Website Service that allows you to do just that, the Link is below...

http://eel.surf7.net.my/

The way you use this is pretty straight forward, but I found a Video that explains it, just follow that up to 3:36 and save the Notepad Document (after removing the dots), you can then close the Video and carry on here with this tutorial...

http://www.youtube.com/watch?v=g1bmOWcEQIA

So you should have now saved your extracted E-Mails in a Notepad Document, but saved them as each one on a seperate line.

Now you will want to Blast Your Offer to the People that those E-Mail Addresses belong to, well to do that you need E-Mail Blaster Software, you can Download 1st Mass Mailer (FULL with Serial Code) from the link below...

https://hotfile.com/dl/150216284/b208737...l.zip.html

(Note: if you can't download the File for some reason, PM me and I'll see what I can do).

Ok, so now you need to set 1st Mass Mailer Up (Install it and enter the Serial Code first) to Blast your E-Mails...

1. Click on options (like a Cog near top right).
2. Under [SMTP Settings] Tab, click 'Add' it has a green Plus + next to it.
3. In SMTP Host Box put the SMTP Server domain in (i.e. smtp.orange.net) it depends which one you want to use, I just use my Internet Service Providers one.
4. Make sure 'Standard' on the right is selected, then click [Ok] at the bottom.

It is important to know that some Internet Service Providers limit the number of SMTP E-Mails you can send per session, so I usually send around 200 and wait 1 Hour and send them in blocks of 10 with a 1 Minute Pause in between.

So at the bottom where you see 'Throttling and Sending Speed' you need to put the following...

Number of messages : 10 - Pause in seconds : 60 - Speed : All the way to the left.

I find those to be adequate settings for me, but you can experiment with them.

5. Click [Ok] at the bottom again.

Under 'Mail Project' on the left, is where you set your E-Mail Campaign up.

1. Click 'Recipient Groups'.
2. Click 'Add' which is on the right and has a green Plus + next to it.
3. Give it a Group Name, this can be anything you like, I just use the word 'Default' (NO Quotes) for now.
4. From Name is the Name you want to be known as in your E-Mails i.e. George.
5. From E-mail is where you are sending the E-Mails from, this can be ANY E-Mail Address you like, as far as I know it DOESN'T even have to exist.
6. tick 'Enabled'.
7. Click [Ok].
8. Double click your new Recipient Group.
9. Click 'Import' top left.
10. Select 'E-mail addresses only from any text files.
11. Click [Next >] at the bottom.
12. Select 'Single file'.
13. Click [Browse] near bottom on the right.
14. Locate your saved Notepad Document (containing the E-Mail Addresses) and select it.
15. Click Click [Next >] at the bottom (Twice).
16. Select 'Inclusive' top right.
17. Click [Finish] at the bottom.
18. Wait for Data to be imported and click [Ok].

Now to write your Message.

1. Click 'Messages'
2. Click 'Add' which is on the right and has a green Plus + next to it.
3. This is self explanitary, basically you just write a subject and body for your E-Mail Campaign, you can add attachments if you want.
4. Make sure where it says 'Send For :' at the bottom that your Recipient Group is ticked.
5. Click [Ok].

You could set up a Schedule if you like, but I never bother, I just make sure I only send around 200 E-Mails per Hour wait in between.

Now you are ready to send, click the [Start] Button at the top and just confirm any actions.

Once you got around 200 successful sends, click [Stop] and confirm aborting, then wait for 1 Hour then click [Start] and then select 'Continue sending from the last state' and click [Ok]. This is to prevent flooding your SMTP Server.

I just wanted to add this, it is with regards to the can-spam act...

http://business.ftc.gov/documents/bus61-...e-business

If you add this at the bottom of your Message and honour what it says, you should be ok (change it to your own words though!)...

Quote:About This Message:

This Message is an Advertisement for a Product or Service that may interest you
and has been sent to you using a simple random E-Mail Address selection System.

There is no need for you to opt out because your E-Mail Address
has NOT been stored on ANY Lists and will NOT be used by us again,
if this should occur (however very unlikely) then please accept our sincere appologese.

If you feel you have received this Message in error, please ignore and delete it.

You arer under NO obligation whatsoever to act upon this Advertisement, although any positive response from you is wholeheartedly appreciated and we give you thanks.

Kind Regards

[Sender Name]

[Sender County, Country or State]

Well that's all, I hope you find this tutorial useful and don't forget to use the 'Thanks' Button!